Andbon B-10 Small Dry Box with 9L Case & Electronic Dehumidifier

The Andbon B-10 Small Dry Box is a lockable and air tight container with a built in hygrometer to store any valuable gear.

Easy to use low budget dry box for camera and lens to stay dry and avoid fugus.

• This dry box is suitable for storing valuable camera and lens
  
  
• The N-200 mini electronic de-humidifier is re-chargeable 
  
  
• The dehumidifier is recycle to use for numerous times.
  
  
• Environmental friendly and no waste water or gas.
  
  
• The mini dehumidifier  only use low power ( DC 12V 5A ) to re-charge.
• Simply plug into AC power point to dry up the de-humidifier and re-use again
  
  
• Dimensions (L x W x H ):  295 x 238 x 224mm
  
  
• Net Weight: 1.35kg

• ***Please note: camera & accessories in the product image are not included***

The Rechargeable Mini Dehumidifier Application

• Efficiently removes damp, mould and moisture from the air.
  
  
• Ideal for use in small areas such as the camera box, kitchen, garage, caravan, wardrobe or anywhere else prone to damp air.
  
  
• Power Consumption : Less than 10W  Input :AC110V-240V   Output : DV12V 5A 
    
• Moisture Indicator : Orange = Dry ; Green = Wet

PACKAGE INCLUDES

1 x Andbon B-10 Small Dry Box 

1 x 9L Case

1 x  N-200 Mini Electronic Dehumidifier

Remarks: Please consider to buy '' Dry Cabinets" which are operating automatically to control the level of humidity. 

Caution:

* This product is not water resistant.  Please keep it away from rain or wet areas.

* Do not place the Absorber in a closed container while charging as the unit will heat up.

* Only charge the Absorber in a well ventilated environment.

* Do not charge the absorber overnight to avoid overheating the unit

Operation Instruction: 

Step 1: Insert the power cable to the Absorber and connect the power cable to main AC power point. It will take about 12-15 hours to charge and dry up the silica gels.

Step 2: Once the silica gels changed from Green to Orange colour, Unplug the power cable and let it rest for about 10-15 minutes to cool down.

Step 3: Place the Absorber into the dry box or container to absorb the moisture. Do not connect the Absorber to power point while using the unit. 

Step 4: (In the future) Repeat step 1 & 2  to re-charge the Absorber once the silicate beads become Green colour.

Step 5: Put the absorber into your dry box with your camera gear. Monitor for humidity between 45-55% and redry as necessary to maintain the humidity.