Yongnuo YN560-TX II N Wireless Manual Flash Controller for Nikon ( Discontinued )

Remotely control and trigger a variety of flashes and radio receivers all from the YN560-TX II Manual Flash Controller from Yongnuo. Designed to work with Nikon cameras, this transmitter is compatible with a variety of equipment, including YN560 III, YN560 IV, YN660, YN968, and YN860Li Speedlites and the RF602, RF603, RF603 II, and RF605 transceivers. This updated model is equipped with a redesigned LCD menu and a quick-locking foot. Using a 2.4 GHz frequency radio with a range of 328' and a choice of 16 channels, the YN560-TX II is able to reliably trigger your flashes from impressive distances. Also, it has remote power control and zoom control from 24-105mm for flashes set up within the six available groups. Additionally, it has a 2.5mm sync port and runs on two AA batteries.

Features

Wireless Triggering Function

• If you use it with like YN-560 IV / YN560III / YN660 / YN968N / YN860Li Speedlite, you need to activate the group function of them with YN560-TX II before you use them together, ( more detailed, you can see our manual. )
  
  
• If you use it with other Yongnuo flash, you need a transceiver of Yongnuo RF-602, RF-603, RF-603 III, RF-605.
  
  

Wireless Shutter Receiver Function

You can mount YN560-TX II into Camera, use shutter release cable ( LS-2.5mm Series ) to connect it with your camera, and set RF-602, RF-603, RF-603 II or RF605 in " transceiver " state, and then you can shutter release your camera and you can also mount one flash into the hot shoe of flash transceiver, it also can be triggered synchronously.

Specification

• Advanced model of YN560-TX Lighter, Smaller, Easier to LOCK on the flashes(but not twist) than YN560-T

•  Can control up to 6 groups meaning that it can control up to 6 flash units.

• Support Wireless Trigger For Yongnuo YN560III / YN560IV / YN660 / YN968 / YN860Li speedlite
  
  
• Compatible with Wireless Shutter Receiver of RF-602, RF-603, RF-603 II, RF605
  
  
• CE / FCC / Telec certification
  
  
• Can work with any model of camera as long as it has standard hot shoe.   

Compatible with

Yongnuo YN560III / YN560IV / YN660 / YN968 / YN860Li speedlite

                      
Yongnuo RF-602 transmitter, RF-603, RF-603 II , RF605 Wireless Shutter Release.
(Means that it can trigger the flashes if one of these flash receivers is connected to the flash, but it cannot control the power)

Package Includes

1 x YN-560TXII N for Nikon

Flash foot not included and for illustration purposes only