K&F Concept

K&F Concept KF06.069 Lens Adapter for Canon EF Lens to Sony E-mount Camera

Write a Review

SKU:: KNFKF06.069
UPC:
MPN:
Shipping:: Calculated at Checkout

On Sale

MSRP: $49.00

Now: $35.49

Was: $39.00

— You save $13.51

Current Stock:

Quantity:

Description

Description

The K&F Concept KF06.069 Lens Adapter is made of brass and aluminum (not plastic), anodized aluminum construction. Diaphragm control of the lens is set manually.

Smooth surface for effortless mount, infinity focus allowed.
Compatible Cameras (Including, but not limited to): Sony NEX-3 NEX-3C NEX-3N NEX-5 NEX-5C NEX-5N NEX-5R NEX5T NEX6 NEX7 NEX-F3 a6000 a5000 a3500 a3000 Alpha A7 A7R NEX-VG10 VG20, etc NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II, STM series such as EF 50mm f/1.8 STM/EF 18-135 IS STM.
Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super-telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
As Canon's EOS lenses are electronically controlled, most Canon EF mount lenses do not feature a manual aperture ring，so when used on our canon to sony adapter, which is a fully manual operation adapter ring, the aperture could not be transferred to the camera, it will stop down to its smallest f/stop by default.

Suitable for

Lens: Canon EF Mount Lens
Camera: Sony Alpha E-mount Cameras (NOT for Sony A mount cameras)
Properly installed when you rotate about 90 degrees and hear a light "click".
Please screw the lens adapter lightly and skillfully, needn't too much force.

Infinity focus position

The position of the infinity mark [∞] of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Note: 'No Lens Attached' - Warning Message Appears

The camera needs to be set to function without an E-Mount lens attached. You can do this by changing the following camera setting: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location of this option may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.